How to change the wipers on your 2017 GMC Acadia

2017
GMC Acadia
product image
step 1 illustration
1

Remove the old blade

Start on the driver's side. Gently lift the wiper arm on your Acadia and release the wiper blade. Blades are typically held in place with a small button to push or tab to pull. Once loosened, most blades will slide right off the wiper arm with some gentle wiggling.
step 2 illustration
2

Position the new blade

Place the new blade near the connection point on the wiper arm. If the connector on the arm is a hook, put the wiper blade adapter at the open end of the hook. If it's a bayonet, look for a slot on the wiper blade connector about the size of the bayonet and position the blade in front of it. If it's a side pin, make sure the correct adapter is on the wiper blade line up the hole on the side of the wiper with the pin.
step 3 illustration
3

Attach the blade

Push the blade on to the wiper arm. You'll hear a click when it locks into position.
step 4 illustration
4

Done!

You're all finished with the driver's side. Repeat the process on the passenger side of your Acadia.
2017
GMC Acadia
product image