How to change the wipers on your 2009 Buick Enclave

driver side
passenger side
rear blade

Front wiper installation  |  Rear wiper installation

step 1 illustration
step 1

Disconnect the blade

Begin on the driver's side of your Enclave. There is a small button on top of the wiper arm; the blade itself is attached beneath the arm. Push the button to release the wiper.
step 2 illustration
step 2

Remove the old blade

Gently slide the wiper off the wiper arm. If the button has been depressed, the wiper should slide directly forward off the front of the wiper arm.
step 3 illustration
step 3

Attach the adapter

Place the adapter on top of the blade. Line up the 'v' on the adapter with the 'v' on the blade and snap it in to place.
step 4 illustration
step 4

Position the new blade

Gently push the wiper blade on to the arm as you slide it back along the arm. The blade will snap into place and the button will come through the hole on the arm with a 'click'.
step 5 illustration
step 5


You're all finished with the driver's side. Repeat the process on the passenger side of your Enclave.

Need more help?

Looking for rear wiper installation instructions? Click here.

Rain-x has a series of installation videos you can view here.
We want to help. Send us an e-mail at and we'll help you install your wipers.