Need wipers?

for your Lucerne

step 1 illustration
step 1

Release the old blade

Begin on the driver's side of your Lucerne. The wiper is held in place in the back by two small wings and in the front by a tab. Push the front of the wiper down so the tab pops out of the slot. Note: if you have OEM blades on your car, they will release in reverse -- push down on the rear of the blade so the wings disengage.

Need wipers?

for your Lucerne
step 2 illustration
step 2

Attach the adapter

Place the adapter on top of the blade. Line up the 'v' on the adapter with the 'v' on the blade and snap it in to place.
step 3 illustration
step 3

Position the new blade

Align the wings on the back of the wiper arm with the corresponding tabs on the adapter. Note: this is the opposite of how OEM blades come off the car and is counterintuitive.
step 4 illustration
step 4

Lock the blade into place

Push the wiper up towards the tab, which will pop into the slot. You will hear a click as it snaps into place.
step 5 illustration
step 5

Done!

You're all finished with the driver's side. Repeat the process on the passenger side of your Lucerne.

Need more help?

Anco has produced a series of videos for front and rear wiper blade installation. View the videos here.
Rain-x also has a series of installation videos you can view here.
We want to help. Send us an e-mail at help@ezwipers.com and we'll help you install your wipers.

logo
2008
Buick Lucerne
product image